Get ready to experience the incredible power amplification of our state-of-the-art Class H design!
The SQ-series offers an amazingly wide range of very cost-efficient, flexible amplifier performance! From 2x900@4Ohm up to 4x1200@4Ohm, seven different models are available for your choice! The Class H output stage is powered by an oversized analog power supply with a strong toroidal transformer, ensuring stable performance even under weak or unstable mains supplies. The front panel is equipped with a power switch and several LEDs to display the working status, making it easy to monitor the amplifier's status.
SQ-3204 4ch Power amplifier
SKU: 0048
$1,268.00Price
Model Name SQ-1604 SQ-2404 SQ-3204 GS1 (EAN) CODE 4260318511988 4260318511995 4260318512015 System Type 4-Channel Class H 4-Channel Class H 4-Channel Class H Output Power
all channels driven
20Hz - 20 kHz, 0.1 % THD4 x 600W @ 4Ohm
4 x 400W @ 8Ohm4 x 900W @ 4Ohm
4 x 600W @ 8Ohm4 x 1200W @ 4Ohm
4 x 800W @ 8OhmOutput Power
Bridge mode2 x 1600W @ 4Ohm
2 x 1200W @ 8Ohm
2 x 800W @16Ohm2 x 2400W @ 4Ohm
2 x 1800W @ 8Ohm
2 x 1200W @16Ohm2 x 3200W @ 4Ohm
2 x 2400W @ 8Ohm
2 x 1600W @16OhmTHD+N ≤0.5% @ 8Ω 1kHz ≤0.5% @ 8Ω 1kHz ≤0.5% @ 8Ω 1kHz Slew Rate >28V/μs >28V/μs >28V/μs Frequency Response
@1Watt, 8Ohm10Hz - 20KHz / ±0.4dB 10Hz - 20KHz / ±0.4dB 10Hz - 20KHz / ±0.4dB Damping Factor
(1kHz and below)>3000 @100Hz >3000 @100Hz >3000 @100Hz Signal to Noise Ratio
20Hz -20 kHz>100dB >100dB >100dB Channel Separation
Crosstalk@1kHz>70dB >70dB >70dB Voltage Gain 36dB (0,775V:49V) 39dB (0,775V:69.5V) 40.3dB (0,775V:80.5V)) Input Sensitivity selectable 0.775V/1V/1.4V selectable 0.775V/1V/1.4V selectable 0.775V/1V/1.4V Input Impedance 20k Ohm Balanced,
10k Ohm Unbalanced20k Ohm Balanced,
10k Ohm Unbalanced20k Ohm Balanced,
10k Ohm UnbalancedFront Control Power switch, Gain control Power switch, Gain control Power switch, Gain control Rear Control Sensitivity Switch,
Mode SwitchSensitivity Switch,
Mode SwitchSensitivity Switch,
Mode SwitchLED Indicators Signal, Clip, Protect,
Power, BridgeSignal, Clip, Protect,
Power, BridgeSignal, Clip, Protect,
Power, BridgeInput Connectors XLR Active balanced
pin1 gnd / pin 2+ / pin3-XLR Active balanced
pin1 gnd / pin 2+ / pin3-XLR Active balanced
pin1 gnd / pin 2+ / pin3-Output Connectors 4 NL4 Sockets, 4xBinding Posts 4 NL4 Sockets, 4xBinding Posts 4 NL4 Sockets, 4xBinding Posts Cooling Low Noise Continuously
Variable speed fanLow Noise Continuously
Variable speed fanLow Noise Continuously
Variable speed fanProtection Full short circuit, Open circuit,
thermal, Ultrasonic,
RF Protection.
Stable Into reactive or
Mismatched loadsFull short circuit, Open circuit,
thermal, Ultrasonic,
RF Protection.
Stable Into reactive or
Mismatched loadsFull short circuit, Open circuit,
thermal, Ultrasonic,
RF Protection.
Stable Into reactive or
Mismatched loadsLoad Protection On/Off muting, DC fault
power Supply shutdownOn/Off muting, DC fault
power Supply shutdownOn/Off muting, DC fault
power Supply shutdownOperating Voltage 230V (+/- 10%), 50-60Hz
USA Version 110V (+/- 10%), 50-60Hz230V (+/- 10%), 50-60Hz
USA Version 110V (+/- 10%), 50-60Hz230V (+/- 10%), 50-60Hz
USA Version 110V (+/- 10%), 50-60HzFuse T-15A T-20A T-25A Idle
Power Consumption< 30W < 30W < 40W Max.
Power Consumption< 1200W < 2000W < 3000W Dimensions (h/w/d) 19“/2U 483mm×492mm×90mm 19“/2U 483mm×492mm×90mm 19“/2U 483mm×492mm×90mm Net weight 22 kg 25 kg 27 kg