The New 3U NX-Amplifier Series
We designed the NX Series for our customers who still love traditional, massive Amplifiers with very big transformers. The 19” cases are 3U high to offer enough space for over dimensioned transformers and capacitors. The illuminated led rings around the potentiometer indicate the input level of the corresponding input channel. It will light green if an input signal is present. Yellow if the input level reaches the 0dB level and red to indicate clipping. This solid design is made without any compromises.
NX3200 3U Power Amplifier
SKU: 0025
$1,820.00Price
Technical Details
Model Name NX-3200 NX-4200 NX-5200 NX-6200 GS1 (EAN) CODE 4260318511827 4260318511834 4260318511841 4260318512022 System Type 2-Channel Class TD Amplifier 2-Channel Class TD Amplifier 2-Channel Class TD Amplifier 2-Channel Class TD Amplifier Output Power
all channels driven
20Hz - 20 kHz, 0.1 % THD2 x 3000W @ 2Ohm
2 x 2250W @ 4Ohm
2 x 1500W @ 8Ohm2 x 4000W @ 2Ohm
2 x 3000W @ 4Ohm
2 x 2000W @ 8Ohm2 x 5000W @ 2Ohm
2 x 3750W @ 4Ohm
2 x 2500W @ 8Ohm2 x 5600W @ 2Ohm
2 x 4200W @ 4Ohm
2 x 2800W @ 8OhmOutput Power
Bridge mode1 x 6000W @ 4Ohm
1 x 4500W @ 8Ohm
1 x 3000W @ 16Ohm1 x 8000W @ 4Ohm
1 x 6000W @ 8Ohm
1 x 4000W @ 16Ohm1 x 10000W @ 4Ohm
1 x 7500W @ 8Ohm
1 x 5000W @ 16Ohm1 x 11200W @ 4Ohm
1 x 8400W @ 8Ohm
1 x 5600W @ 16OhmTHD+N @ 8Ω 1kHz ≤0.05% ≤0.05% ≤0.05% ≤0.05% Slew Rate >35V/μs >35V/μs >35V/μs >35V/μs Frequency Response
@1Watt, 8Ohm10Hz -20kHz / ±0.5dB 10Hz -20kHz / ±0.5dB 10Hz -20kHz / ±0.5dB 10Hz -20kHz / ±0.5dB Damping Factor
(@20Hz-100Hz)>5000 >5000 >5000 >5000 Signal to Noise Ratio
20Hz -20 kHz>100dB >100dB >100dB >100dB Channel Separation
Crosstalk@1kHz>70dB >70dB >70dB >70dB Voltage Gain 43.0dB (0,775V:110V) 44,3dB (0,775V:127V) 45,2dB (0,775V:141,5V) 45,7dB (0,775V:150V) Input Sensitivity 0.775V 0.775V 0.775V 0.775V Input Impedance 20k Ohm Balanced
10k Ohm Unbalanced20k Ohm Balanced
10k Ohm Unbalanced20k Ohm Balanced
10k Ohm Unbalanced20k Ohm Balanced
10k Ohm UnbalancedFront Control Power switch, Gain control Power switch, Gain control Power switch, Gain control Power switch, Gain control Rear Control Mode Switch Mode Switch Mode Switch Mode Switch LED Indicators Signal Indicator,
ProtectSignal Indicator,
ProtectSignal Indicator,
ProtectSignal Indicator,
ProtectInput Connectors XLR Active balanced
pin1 gnd / pin 2+ / pin3-XLR Active balanced
pin1 gnd / pin 2+ / pin3-XLR Active balanced
pin1 gnd / pin 2+ / pin3-XLR Active balanced
pin1 gnd / pin 2+ / pin3-Output Connectors 2 Neutrik NL4 Sockets
2 Binding Posts2 Neutrik NL4 Sockets
2 Binding Posts2 Neutrik NL4 Sockets
2 Binding Posts2 Neutrik NL4 Sockets
2 Binding PostsCooling Low Noise Continuously Variable
speed fanLow Noise Continuously Variable
speed fanLow Noise Continuously Variable
speed fanLow Noise Continuously Variable
speed fanProtection Full short circuit, Open circuit,
thermal, Ultrasonic, RF Protection.
Stable Into reactive or
Mismatched loadsFull short circuit, Open circuit,
thermal, Ultrasonic, RF Protection.
Stable Into reactive or
Mismatched loadsFull short circuit, Open circuit,
thermal, Ultrasonic, RF Protection.
Stable Into reactive or
Mismatched loadsFull short circuit, Open circuit,
thermal, Ultrasonic, RF Protection.
Stable Into reactive or
Mismatched loadsLoad Protection On/Off muting
DC fault power
Supply shutdownOn/Off muting
DC fault power
Supply shutdownOn/Off muting
DC fault power
Supply shutdownOn/Off muting
DC fault power
Supply shutdownOperating Voltage 230V (+/- 10%), 50-60Hz
USA Version
110V (+/- 10%), 50-60Hz230V (+/- 10%), 50-60Hz
USA Version
110V (+/- 10%), 50-60Hz230V (+/- 10%), 50-60Hz
USA Version
110V (+/- 10%), 50-60Hz230V (+/- 10%), 50-60Hz
USA Version
110V (+/- 10%), 50-60HzIdle
Power Consumption< 80W < 100W < 120W < 150W Max.
Power Consumption< 3500W < 5000W < 6000W < 7000W Fuse T-25A T-30A T-35A T-35A Dimensions (h/w/d) 19“/3U 483W x 485D x 132H 19“/3U 483W x 485D x 132H 19“/3U 483W x 485D x 132H 19“/3U 545W x 485D x 132H Net weight 38 kg 39,5 kg 44,5 kg 50 kg